Carvings, DIY, and wall art
See how to setup and use both the Kreg Jig K3 and K4 for easily creating pocket holes.
They are quickly becoming my favorite shop tools.
And they make joining boards together so fast, easy, and strong.
Read More about Kreg Jig K3 and K4: How to, Cheat Sheet, and Tips
This is, by far, the easiest way I’ve found to make super sturdy workbench legs from a 4×4.
You can use a circular saw to cut the notches for your 2×4 rails, but I found it was even easier to use my sliding mitre saw set to a specific depth. And no chiseling was required this way either.
See how I easily made mine.
Get all the details and dimensions on how I built this mitre saw station. It’s an easy DIY weekend project.
See how I built the material support shelves on each side of my mitre saw station build.
You’ll get all my tips and tricks for measuring and pitfalls to avoid, plus how I mounted each piece.
See a super easy way to cut plywood without heavy lifting or fear of it binding the circular saw.
And see great tips on clamping a cutting guide too.
See how I attached the legs and cross bracing for the base of my mitre saw station bench, and the issues I ran into, and how I coped with them. Plus, see how I securely attached the casters to the legs.
