See every step of this build in this 5-part series
See how to take all of your measurements, the full materials list, all of the tools you’ll need, and the first steps in the actual build.
See how to add the 1×2 rails to the top and bottom plywood of our crate and why I did not pre-cut or even use a tape measure on them.
See how to quickly add the uprights to connect the top and bottom and finish the frame.
See how to add the slats for the back and sides, plus how to build the door to lay flat or as a side-swing gate.
See how to add the blocks for the caster mounts, as well as boards to make the bottom plywood stiffer.
See each step as projects
are being created.